Powersoft T304 4ch Amplifier 750W DSP-DANTE

POW-T302
PA

Powersoft T304 4ch Amplifier 750W DSP-DANTE

POW-T302
Rekommenderat pris: SEK 27 000,- inkl. moms
Enhet:
Overview chart The T Series is a very flexible and cost effective amplifier platform loudspeaker processor. All models deliver the same high peak voltage allowing high SPL with single 8/16 ohm cabinets on all models. The high voltage is also good for sharing power between the channels for applications such as bi-amped loudspeakers or subwoofers with passive tops. The amplif...

  • Varubeskrivning
  • Specifikationer

Overview chart

The T Series is a very flexible and cost effective amplifier platform loudspeaker processor.

All models deliver the same high peak voltage allowing high SPL with single 8/16 ohm cabinets on all models. The high voltage is also good for sharing power between the channels for applications such as bi-amped loudspeakers or subwoofers with passive tops.

The amplifiers feature input via Dante, AES3 and analog. The Dante and AES3 solutions are optimized for daisy-chained distribution of 2-channel audio for distribution to many amplifiers without the need for external switches/repeaters/ splitters. A simple Dante system has a daisy chain with the mixing console at one end and a WiFi access point at the other end and the amplifiers in-between.

General
Number of channels 2

Output power Single channel mode Bridge mode

2 O 4 O 8 O 4 O 8 O

1500 W 1500 W 1200 W 3000W 3000W
Max output voltage / current 145 Vpeak / 50 Apeak

AC Main Power
Power supply Universal, regulated switch mode
Nominal power requirement 100-240 V ±10%, 50-60 Hz
Operating voltage 90 V - 264 V
Power consuption** 115 V
230 V
Idle 23 W
23 W
1/8 of max output power @ 4 O 517 W 4.6 A
527 W 2.7 A

Thermal
Operating temperature range 0° - 45° C - 32° - 113° F
Thermal dissipation** 115 V
230 V
1/8 of max output power @ 4 O 485 BTU/h 122.2 kcal/h
517 BTU/h 130.3 kcal/h

AUDIO
Gain 32dB
Input sensitivity 2.57 Vrms
Max input level 24 dBu
Frequency response 20 Hz - 20 kHz (±0.5 dB) @ 1 W, 8 O
S/N ratio > 110 dB (20 Hz - 20 kHz, A weighted)
Crosstalk separation < -70 dB @ 1kHz
THD+N < 0.1% (typical < 0.5%)
IMD < 0.1% (typical < 0.5%)
Input impedance 20 kO balanced

DSP
AD Converter 24 Bit Tandem™ @ 48 kHz 125 dB-A Dynamic Range - 0.005 % THD+N
DA Converter 24 Bit Tandem™ @ 48 kHz 117 dB-A Dynamic Range - 0.003 % THD+N
Memory/presets 256 MB (RAM) plus 512 MB flash for presets /
Input equalizer Raised-cosine, custom FIR, parametric IIR: peaking, hi/lo-shelving, all-pass, band-pass, band-stop, hi/lo-pass
Crossover linear phase (FIR), Butterworth, Linkwitz-Riley, Bessel: 6 dB/oct to 48 dB/oct (IIR)
Delay 2 s (input) + 100 ms (output) for time alignment
Limiters TruePower™, RMS voltage, RMS current, Peak limiter
Damping control Active DampingControl™ and LiveImpedance™ measurement

Front panel
Indicators and Controllers 8 x Push-button - Setting operating parameters
1 x Display - Settings and monitoring
1 x Power switch -
Connectors
AC main 1 x IEC C20 connector - 20 A max (region-specific power cord provided)
Audio signal input 2 x XLR - Signal input
Loudspeakers 2 x speakON - Neutrik NL4MD
Network/data 1 x Rj45 socket - RS485 data connection (non-DSP version)
1 x Rj45 socket - DANTE®

Construction
Dimensions (L x H x W) 484 mm x 44.45 mm x 405 mm (19.1 in x 1.8 in x 16.0 in)
Weight 6.7 kg (14.8 lb)