Tascam Microphone set drums - 1xTM-50DB 1xTM-50DS 2xTM-50C

TM-DRUMS
Tascam

Tascam Microphone set drums - 1xTM-50DB 1xTM-50DS 2xTM-50C

TM-DRUMS
Rekommenderat pris: SEK 2 555,- inkl. moms
Enhet:
TM-DRUMS is a set of four microphones tailored for getting a good drum sound with ease using a Tascam multi-track recorder or audio interface with DAW software. Especially designed for beginners who cannot afford separate mics for each and every part of the drum kit, this mic set meets the minimum requirements for multi-microphone recordings and can even be handled by people who are not yet so familiar with creating ...

Variant:
  • Varubeskrivning
  • Specifikationer

TM-DRUMS is a set of four microphones tailored for getting a good drum sound with ease using a Tascam multi-track recorder or audio interface with DAW software. Especially designed for beginners who cannot afford separate mics for each and every part of the drum kit, this mic set meets the minimum requirements for multi-microphone recordings and can even be handled by people who are not yet so familiar with creating a good sounding mix with many sources.

TM-DRUMS comprises of one dynamic mic designed for the bass or kick drum, another dynamic mic designed for the snare, and two condenser mics that can be used for hi-hat, toms and cymbals. Each of the three mic types has its own special characteristics to enhance the instrument it was made for.

The TM-50DB’s frequency response delivers a thick bass thump with the right amount of punch, while the TM-50DS enhances the special character of the snare drum with attack and clarity. The TM-50C microphone can be used as an overhead microphone to capture the sound of your hi-hat and cymbals. As a condenser microphone, it handles high sound pressure levels and captures a wide frequency range. Since there are two of these in the set, you can also use that pair to easily create a stereo recording of the entire drum kit, supported by the two mics for kick and snare drum.

TM-50DB Specifications

  • Bass drum microphone

  • Working principle: dynamic

  • Directivity pattern: unidirectional (cardioid)

  • Frequency response: 50 Hz – 15 kHz

  • Output impedance: 400 O, ±30 % (1 kHz)

  • Load impedance: <1 kO

  • Sensitivity: –55 dB, ±3 dB (0 dB = 1 V/Pa at 1 kHz)

  • Connector: 3-pin XLR, male

  • External dimensions (H × W × D):
    118 mm × 59 mm × 115 mm

  • Weight: 460 g (mic body only)

  • Included accessory: 5/8-inch to 3/8-inch screw adapter


TM-50DS Specifications

  • Snare drum microphone

  • Working principle: dynamic

  • Directivity pattern: unidirectional (cardioid)

  • Frequency response: 50 Hz – 14 kHz

  • Output impedance: 350 O, ±30 % (1 kHz)

  • Load impedance: <1 kO

  • Sensitivity: –56 dB, ±3 dB (0 dB = 1 V/Pa at 1 kHz)

  • Connector: 3-pin XLR, male

  • External dimensions (H × W × D):
    105 mm × 43 mm × 98 mm

  • Weight: 330 g (mic body only)

  • Included accessory: 5/8-inch to 3/8-inch screw adapter


TM-50C Specifications

  • Overhead/cymbals microphone

  • Working principle: condenser (16-mm diaphragm)

  • Phantom power required: DC 48 V

  • Directivity pattern: unidirectional (cardioid)

  • Frequency response: 30 Hz – 18 kHz

  • Output impedance: 100 O, ±30 % (1 kHz)

  • Load impedance: <1 kO

  • Sensitivity: –38 dB, ±3 dB (0 dB = 1 V/Pa at 1 kHz)

  • Connector: 3-pin XLR, male

  • External dimensions (Ø × L):
    21 mm × 117 mm

  • Weight: 85 g (mic body only)

  • Included accessory: 5/8-inch to 3/8-inch screw adapter