Tascam USB Audio Interface - 1 in 2 out

US-1X2HR
Tascam

Tascam USB Audio Interface - 1 in 2 out

US-1X2HR
Rekommenderat pris: SEK 1 175,- inkl. moms
Enhet:
When one mic input is enough The US-1x2HR is the smallest member of the Tascam US-HR series of high-resolution USB audio interfaces. It has one mic and one instrument input and is therefore particularly suitable for simple and intuitive guitar/vocal recording with a computer. The included loopback function and support for Open Broadcaster Software (OBS Studio), however, makes it also an excellent choice ...

Variant:
  • Varubeskrivning
  • Mer information
  • Specifikationer

When one mic input is enough

The US-1x2HR is the smallest member of the Tascam US-HR series of high-resolution USB audio interfaces. It has one mic and one instrument input and is therefore particularly suitable for simple and intuitive guitar/vocal recording with a computer. The included loopback function and support for Open Broadcaster Software (OBS Studio), however, makes it also an excellent choice for podcast creation and live streaming. Last but not least, it is a perfect solution for feeding an amplifier system with music from a computer in high quality, for example for a birthday party.

Lower noise and distortion – better sound than ever

The compact US-1x2HR incorporates a wealth of features, including high audio resolution up to 24-bit/192 kHz, ultra-low latency with a Windows buffer size starting at four samples, Ultra-HDDA mic preamplifiers with 48-volt phantom power for superior sound quality with ultra-low noise, a robust USB Type C connector, and a rich assortment of included software to start producing audio right away. The lightweight interface is ideal for mobile recording and production using an iPhone or iPad* with the included Cubasis LE so you can take it to your practice room, use it to report from a live event, or capture nature sounds outdoors.

Features at a glance

  • Advanced version of our popular US-1x2 with even better sound quality
  • Provides two audio inputs and two audio outputs to a Windows or Mac computer or iOS device
  • Audio resolution up to 192 kHz / 24 bit
  • USB Audio Compliance 2.0 for iOS connection

Hardware features

  • One XLR microphone input with switchable phantom power
  • One 6.3-mm TRS analogue input selectable between line level (balanced) and instrument level (unbalanced, for direct coonnection of a guitar or bass)
  • Two line inputs with RCA connectors on the rear can be used instead of the front inputs
  • One high-quality Ultra-HDDA (High Definition Discrete Architecture) microphone pre-amp with ultra-low noise (EIN: –128 dBu)
  • Wide input gain range of 58 dB, ideal for dynamic microphones
  • Stereo line output
  • Direct monitor option for low-latency monitoring
  • Headphones output delivering 18 mW per channel
  • Independent level controls for line and phones outputs
  • USB bus-powered for mobile recording
  • Rugged aluminum body
  • Angled industrial design for ease-of-use on a desktop

Software features

  • In-house developed driver for Windows devices ensures stable operation with low latency
  • The buffer size for Windows can be selcted up from 4 samples to facilitate a recording environment with ultra-low latency
  • Each input can be switched on/off individually
  • Input monitor mode can be selected between stereo and mono
  • A loopback function allows two audio channels from the computer to be merged with the input signals and send this mix to the streaming or communication software
    • Input and computer signals can each be selected between stereo and mono
    • A slider lets you adjust the broadcast level
  • Switchable auto power save mode to reduce battery consumption on the laptop/tablet computer in mobile use
  • Automatic update function available for software, driver and firmware updates (you can install new updates with the press of a button)
  • Bundled with Cubase LE and Cubasis LE3, IK Multimedia SampleTank 4 SE and Antares Auto-Tune Unlimited (free 3-month subscription)
  • Compatible with major DAW software

Specifications

General
Sampling frequencies 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz
Quantization bit depth 24 bits

Analogue audio inputs
Mic input (balanced, IN1) XLR-3-31 (1: GND, 2: HOT, 3: COLD)
Input impedance 2.4 kO
Nominal input level (gain knob at max.) -65 dBu (0.0004 Vrms)
Nominal input level (gain knob at min.) -8 dBu (0.0775 Vrms)
Maximum input level +10 dBu (2.449 Vrms)
Maximum gain 58 dB
Line/instrument input (balanced/unbalanced, IN2) 6.3-mm standard TRS stereo jack
(Tip: HOT, Ring: COLD, Sleeve: GND)
When set to LINE (balanced)
Input impedance 10 kO
Nominal input level (gain knob at max.) -41 dBu (0.0069 Vrms)
Nominal input level (gain knob at max.) +4 dBu (1.228 Vrms)
Maximum input level +20 dBu (7.75 Vrms)
Maximum gain 45 dB
When set to INST (unbalanced)
Input impedance =1 MO
Nominal input level (gain knob at max.) -51 dBV (0.0028 Vrms)
Nominal input level (gain knob at max.) –6 dBV (0.5015 Vrms)
Maximum input level +3 dBV (1.4125 Vrms)
Maximum gain 45 dB
Line input L/R (unbalanced) RCA
Input impedance 10 kO
Maximum input level +6 dBV (1.995 Vrms)

Analogue audio outputs
Line output L/R (unbalanced) RCA
Output impedance 100 O
Maximum output level +6 dBV (1.995 Vrms)
Headphones output 6.3-mm standard stereo jack
Maximum output power 18 mW + 18 mW or higher
(THD+N 0.1% or less, 32 O)
Other inputs and outputs
USB 4-pin USB C-type
Transfer rate USB 2.0 Hi-speed (480 Mbits/s)
Power supply (DC IN 5V) USB Micro B type

Audio performance
Mic preamp EIN (equivalent input noise) -128 dBu or less
(150 O termination, gain knob at max.)
Frequency response
Mic input 44.1/48 kHz: 20 Hz – 20 kHz, +0 dB/–0.4 dB (JEITA)
88.2/96 kHz: 20 Hz – 40 kHz, +0 dB/–0.4 dB (JEITA)
Line input 44.1/48 kHz: 20 Hz – 20 kHz, +0.2 dB/–0,1 dB (JEITA)
88.2/96 kHz: 20 Hz – 40 kHz, +0.2 dB/–0.4 dB (JEITA)
Line output 44.1/48 kHz: 20 Hz – 20 kHz, +0.2 dB/–0,1 dB (JEITA)
88.2/96 kHz: 20 Hz – 40 kHz, +0.2 dB/–0.4 dB (JEITA)
S/N ratio
Mic input to computer 109 dB
(gain knob at minimum, 20-kHz LPF, A-weighted)
Line input to computer 105 dB
(gain knob at minimum, 20-kHz LPF, A-weighted)
Computer to line output 110 dB
(MONITOR knob at maximum, 20-kHz LPF, A-weighted)
Distortion (THD+N)
Mic input to computer 0.0013 %
(gain knob at minimum, –5 dBFS input level, 1-kHz sine wave, 20-kHz LPF)
Line input to computer 0.0027 %
(gain knob at minimum, –5 dBFS input level, 1-kHz sine wave, 20-kHz LPF)
Computer to line output 0.0015 %
(MONITOR knob at maximum, –4 dBFS input level, 1-kHz sine wave, 20-kHz LPF)
Crosstalk 95 dB or more
(mic/line input to line output, 1-kHz sine wave, gain knob at minimum)

Host computer requirements
Windows
Computer hardware requirements Windows-compatible computer with a USB 2.0 port
CPU/processor speed 2 GHz or faster dual core processor (x86)
Memory 2 GB or more
Supported audio drivers ASIO 2.0, WDM
Mac
Computer hardware requirements Mac with a USB 2.0 port
CPU/processor speed 2 GHz or faster dual core processor
Memory 2 GB or more
Supported audio driver Core Audio
iOS device iOS device running iOS 7 or later
Supported audio driver Core Audio
Power supply and other specifications
Power supply
Used with a computer USB bus power
Used with an iOS device USB power adapter (that can supply 5 V and a current of at least 700 mA)1
External battery pack (that can supply 5 V and a current of at least 700 mA)2
Power consumption 1.8 W
Dimensions (W × H × D, without protrusions) 146 mm × 55 mm × 120 mm
Weight 623 g
Operating temperature range 5–35 °C
1We strongly recommend using a Tascam PS-P520E or the USB power adapter included with the iPad/iPhone. No USB power adapter is included with an iPod Touch. To use it with an iPod Touch, purchase a genuine Apple USB power adapter (that can supply 5 V and a current of at least 700 mA) separately.
2We strongly recommend using a Tascam BP-6AA external battery pack. If using another external battery pack or mobile battery, purchase one that can supply 5 V and a current of at least 700 mA.